Tag: #buyhandmade #madeintoronto #madeincanada #roncesvalles #roncesvallesretail #parkdale #customjewellery

July 31, 2016August 7, 2019Jewel EnvyGeneral

Summer Seaside Blues

With the summer in full swing, my thoughts turn to my favorite summer place–Georgian Bay and the multiplicity of blues that can be seen in the water. I am not alone in these thoughts–many customers this time of year come into the store in search of the perfect blue jewellery to wear by the water.

My perfect summer look? An oversized white shirt with layers of blue! Like this lovely look (from Chicos).


Breeze the summer away with whites and blues!

Looking around Jewel Envy I realize that I (and you!) don’t have to have to go far to achieve this look. All the resident goldsmiths here in the blue house have caught the blue summer wave.

From bottom to top: atelier J’s Sterling branch with turquoise, Glaciale’s Sterling and enamel pendant, Ivane Thiebault’s Sterling shell and blue beads, Pash’s Sterling and chalcedony hummingbirds, and finally, Tammy McClennan’s Sterling, brass, and seafoam-coloured, powder-coated pendant.

Jewel Envy has your summer blues covered! Come on in and get your layer on! But don’t forget your white shirt!

-Micheline

Reigning mad skills

September 6, 2014August 7, 2019Jewel EnvyGeneral

These are some oldies, but goodies. Last year the studio was tapped to create some prop pieces for the TV show Reign. Below you can see the process of creating pieces that are emblems for Mary, Queen of Scots personal bible. The design was sourced from films stills to recreate the elements of the prop. The emblems were later attached to a hand bound book by a bookbinder. – Alexis

Working from a blurry photo still, I first
sketched the pieces out and did a transfer on the wax before cutting out
the shape. You can see in the photo the drawing/scratch marks that
were my guide for sawing the shapes out. I like to think of piercing
work as drawing with my saw ;o)

To prevent the wax from breaking as I was carving the details I glued the pieces down onto sections of scrap wood. There are few things more heartbreaking than when you are almost finished adding detail and it breaks. With the wax firmly glued in place as I was working all the pieces stayed intact (success!)

To remove the pieces from their wood bases I simply soaked them in water, here you can see all five designs.

The show needed to have replicas of the props, which meant making multiples. I made molds directly from the wax carvings to duplicate the designs.

Here are the wax duplicates after I attached sprues to each. There needed to be enough to make two book covers with the emblems. The designs in the middle and bottom right appear twice on the cover, so it meant making four (you can see I made extra in case the castings didn’t work.

Casting these pieces was an ORDEAL. Between this and the last picture I made the duplicates into a casting tree (which can be seen just left of my saw); I made three separate trees. The metal I used was bronze… as I was melting the metal in a crucible it started to seize and just would not get molten. My crucible turned into a dirty mess and after standing and heating the first batch of metal with a torch for almost 15 minutes I stopped what I was doing, took a break and decided to try changing my normal casting process. I altered what I normally do when melting metal and was eventually able to cast the three groupings of pieces.

Here you can see that all the pieces casted well, I even have the extras that worked on the left. I filed and polished them up before eventually goldplating them.

Here are the final pieces with antique looking goldplating. Duotang-like tabs were added to the back so that they could easily be attached to the book props as the emblems on Mary, Queen of Scots personal bible.